In this case this is the only choiceīecause the GPIO expander is not populated on the PCB:# LEARN / TOPIC / BUILD INSTRUCTIONSHere all the links to all you need to buid the board, including a demo program for the Arduino IDE:Blink test using I2CSchematicBOM (components list)PCB Layout assembling guideĮveryday Carry (EDC) Heater Imagine that you are in a harsh cold island. The photo shows the right position.The table written near the two solder jumpers shows the two possible configurations.In the previous photo the User key is configured (SJ1 shorted) to beĬonnected to the GPA1 pin of the GPIO expander (see the schematic).In the following photo the User key is configured to be connected to Of the nodeMCU (key connected to ESP-01 GP0IO) or as a generic user keyĬonnected to the GPA1 port of the GPIO expander (MCP23017).Using Arduino IDE the second choice seems to be better, of course only if you have populated the GPIO expander.To configure the User key there are two solder jumpers (SJ1 and SJ2) in the back side of the PCB:Note that the references SJ1 and SJ2 on the PCB are swapped. Here it is a NanoBoard 'lite', without the optional expander:How to configure User key with solder jumpers (SJ1/SJ2)The User key can be configured to act as the FLASH key

If you decide not to want it, just not to populate theĬomponents inside the dotted optional part of the schematic.

Require to press any key (like for the well known NodeMCU).Please note that you need before to set 'nodemcu' (instead of the default 'ck' ) as 'Reset Method' inside the 'Tools' menu of Arduino IDE.The optional expanderThe ESP-01 NanoBoard has an optional 16x GPIO expander (see the Key, various control leds.The idea was to reuse the ESP-01 for a board easy to program, ideal for beginners and classrooms.# TECHNICAL DETAILS / COMPONENTSThe video shows the NanoBoard in action, loading a blink demo program Serial-USB adapter (CH340), voltage regulator with polyfuse on USB,Įxternal power connector, rugged USB B connector, optional 16x GPIOĮxpander, I2C connector, ESP-01 GPIO connector, expander connectors,Īutomatic upload circuitry (Arduino IDE), configurable User key, Reset Modules (ESP8266) with some features for an easy use: on board

# DESCRIPTIONThe ESP-01 NanoBoard is a little 'motherboard' for the well known ESP-01

Andonstar adsm201 software windows